20kV three phase transformer

Features of Products

20kV Distribution Transformers The abbreviation "change"refers to a static electrical appliance in a power distribution system that converts AC voltage and current
according to the law of electromagnetic induction to transmit AC power. In some areas, power Transformers with a voltage level below 20 kV are called"distribution Transformers"or "
blending"for short. The installation of "matched"places and places is both a substation. Distribution Transformers should be installed on the column or open floor installation.

Standard

GB1094.1-2013; GB1094.2-2013; GB1094.3-2013; GB1094.5-2008; GB/T 6451-2008; GB/T 1094.10-2003; JB/T 10088-2004
IEC60076; SANS 780 STANDARDS

Features of Products

1. Meet or exceeds ANSI. IEC. GB. SANS. Standards
2. Safe Handling, Installation and Operation.
3. Attractive, modern appearance
4. Reasonable Structure
5. Fully-sealed
6. Higher system reliability
7. High security and reliability in operation
8. High capacity of overload and efficiency
9. Robust construction having excellent short circuit and thermal withstand capabilities
10. EVERPOWER Transformers are more efficient by Reduced no-load losses and Reduced load losses

Transformer normal service conditions

1.The height above the sea level is below 1000m;
2.Ambient temperature;
3.Highest air temperature+40℃;
4.Highest daily average air temperature+30℃;
5.Highest annual average air temperature+20℃;
6.Lowest outdoor air temperature-25℃;

 Note:Tapping range of high-voltage:±2*2.5%; Frequency:50Hz